Waterproof Aluminium AirTag Case with Anti-Theft Screw, Ring and Star Pattern

Yes, the Waterproof Aluminium AirTag Case with Anti-Theft Screw, Ring and Star Pattern is designed for Apple's AirTag, which fits into a housing made to its size. The AirTag is not included.

Unscrew the anti-theft screw with the small screwdriver supplied, place the AirTag in its housing, then close the case and screw it back. Do not overtighten, so as not to mark the metal.

Unscrew the case, take out the AirTag, then open it as usual to replace the CR2032 battery. Then put it back in the case and tighten the screw.

Yes, it is stated to be IPX8 waterproof: rain, splashes and rinsing are no problem. As a precaution, avoid prolonged immersion and sea water, and dry the case after contact with water.

The white face of the AirTag remains uncovered on the front of the case. After fitting it, simply check its position in the app on your iPhone that locates your devices.

To keys, a bag, luggage or a pet's collar, using the ring supplied. For a collar, check that the case, about 4 cm in diameter, does not bother the animal.

Yes, the aluminium case surrounds the AirTag and absorbs everyday knocks, such as a key ring being dropped. The metal can, however, get scratched over the months.

No, the case is sold without an AirTag. You will need to have your own ready before fitting it.

A damp cloth or a rinse in clean water is enough. Avoid abrasive products, which could damage the pattern.