Silicone AirTag Case with Open Front and Loops for Dog or Cat Collar

Yes, the Silicone AirTag Case with Open Front and Loops for Dog or Cat Collar is designed for Apple's AirTag, which sits in a slot sized to fit it. The AirTag is not included.

Gently press the AirTag into the round slot until it is firmly seated, then check that it does not move. To remove it, pull the silicone around the slot slightly and take it out without forcing.

First take the AirTag out of the case, open it by pressing on its cover and turning it, then replace the CR2032 battery. Then put the AirTag back in its silicone slot.

It slides onto the strap of a dog or cat collar through its two loops. The case is 3.5 cm wide: measure the width of your strap, which must be able to pass through the openings.

Yes, it is shown on cat and dog collars alike. It measures about 6.5 cm by 3.5 cm and 1 cm thick: for a very small animal, check that the bulk remains suitable.

Yes, silicone is not affected by rain or splashes. No IP rating is stated and the front of the slot is open: avoid prolonged swimming with the AirTag.

Three colours, Luminous Bright Pink, Luminous Sky Blue and Luminous White, are stated to be luminous: they store light and then glow in the dark. The glow weakens as the minutes pass.

Rinse it under clear water with a little mild soap, then dry it before putting the AirTag back. Avoid solvents, which can damage the silicone.

Fifteen colours are available, three of them glow-in-the-dark. The plain shades range from black to white by way of red, orange, yellow, green, blue, purple and pink.