Waterproof Bike AirTag Mount Two-Piece Shell O-Ring Anti-Theft Screws

Yes, the Waterproof Bike AirTag Mount Two-Piece Shell O-Ring Anti-Theft Screws is designed for the AirTag, which sits in the slot made to its size. The AirTag is not included.

Place the AirTag between the two shells with the O-ring in position, then fasten them together with the fixing screws provided and the screwdriver.

The two drilled lugs take the anti-theft screws, which you tighten with the key provided. The cable ties and the adhesive disc are other ways of fitting it, depending on where you choose to put it.

Yes, it is claimed to have an IP68 rating: an O-ring seals the two shells. Each time you open it, check that the ring is properly seated, as the waterproofing depends on it.

Yes, it unscrews with the tools provided. Then take out the AirTag, press its metal cover and turn it to replace the CR2032 battery.

Two shells, an O-ring, two anti-theft screws with their key, four fixing screws with a screwdriver, four cable ties and an adhesive disc. The AirTag is not included.

It is flat and barely larger than the AirTag, with its two fixing lugs. In black, it blends in with a frame or a dark accessory.

No, they only slow down a quick removal, as they need a special key. They do not stop a determined thief.

Rinse it with clean water and wipe it with a soft cloth, without solvents. Check the tightness of the screws from time to time after rides on rough ground.