Under-Saddle AirTag Bike Mount with Security Screws and Rail Fitting

Yes, the Under-Saddle AirTag Bike Mount with Security Screws and Rail Fitting is designed for Apple's AirTag, which sits in a housing made to its size. The AirTag is not included.

The kit contains a lid, a base, two security screws with their self-locking nuts, a special screwdriver, four gaskets and an instruction leaflet.

Place the AirTag in the base, put the lid on, then clamp the mount onto the two rails with the screws and the screwdriver supplied. Choose the gaskets that match the thickness of the rails so that nothing moves.

Saddles with rails of 7 mm, 7 x 9 mm or 7 x 10 mm, thanks to the two types of gasket supplied. Check the thickness of your rails before ordering.

Undo the security screws with the screwdriver supplied, remove the lid and take out the AirTag to open its battery compartment. Then put the AirTag and lid back and tighten the screws again.

Yes, it is advertised as splash resistant, which is enough for ordinary rain. Avoid submerging it in water.

No, the ABS plastic case is advertised as not blocking the signal. Test the AirTag's location before your first ride.

Yes, the matte black case is small and blends into the shadow under the saddle, so it is hard to spot at a glance.

No, they are advertised as impossible to remove by hand or with ordinary tools: the special screwdriver supplied is used to undo them. Keep it to open the mount.

Wipe it with a soft cloth and dry it. Check the tightness of the screws from time to time, especially after long rides on rough roads.