MagSafe Car Mount Air Vent Wireless Charging Illuminated Ring

Yes, the MagSafe Car Mount Air Vent Wireless Charging Illuminated Ring holds any MagSafe iPhone by magnet, from the iPhone 12 to recent models, bare or in a MagSafe-compatible case. For an older iPhone or a case without a magnet, an adhesive metal ring needs to be added.

Yes, the disc is a wireless charger advertised at up to 15 W. The power actually received depends on the iPhone, its case and the power supply connected.

It plugs in through the supplied USB cable, either into a USB port in the car or into a cigarette lighter adapter with a USB output, not shown in the photos. The description states a 5 V or 9 V power supply.

The hook slides between two slats and the ball joint carries the disc. Very thin, round or fragile slats are less suitable: try it while stationary before driving.

Yes, the iPhone stays held by the disc's magnets, but how well it holds depends on the weight of the phone, the case and the slats carrying the hook. Test it while stationary before setting off.

Stick the adhesive metal ring to the back of the iPhone or inside the case: the disc attracts it. A thick or metal case weakens the attraction and may interfere with charging.

Yes, a little warmth is normal during wireless charging, and more so in sunshine behind the windscreen. Protection against overheating, overvoltage and short circuits is advertised; remove the iPhone if the temperature rises.

Yes, seven ring colours are advertised, but how to change them is not detailed. Whether it can be switched off is not specified.

Gently lift the hook out of the vent while holding its base, without pulling on the disc or the ball joint. No adhesive is used on the vent.