MagSafe Car Mount Dashboard Adhesive Oval Magnetic Block Rotating

Yes, the MagSafe Car Mount Dashboard Adhesive Oval Magnetic Block Rotating holds any MagSafe iPhone by magnet, from the iPhone 12 to recent models, bare or in a MagSafe-compatible case. For an older iPhone or a case without a magnet, an adhesive metal ring needs to be added.

Whenever the phone or case has no MagSafe magnet: the manufacturer then states that an adhesive metal plate must be stuck to the back of the phone or case. With a thin case, 1 mm at most, it sticks directly to the phone. Whether the plate is supplied with the mount is not stated.

Yes, under the conditions described by the manufacturer: eight magnets claimed and a well-stuck plate. A thick case or a badly fitted plate reduces the hold; check it while stationary before driving.

Clean and dry a smooth surface, stick the adhesive base, then lock the arm in the chosen position. Avoid textured, soft or very hot surfaces, where the adhesive holds poorly.

Heat the adhesive with a hairdryer, then peel it off slowly by passing a thin wire behind the base. Residue can be cleaned off with a cloth; try a discreet area first, as some coatings mark.

Yes, the arm turns the oval block: the iPhone sits vertically or horizontally.

No, it is a magnetic mount with no built-in charging. The iPhone charges by its cable, as usual. In full sun, avoid leaving the phone on the dashboard: it heats up on its own.

Yes, the manufacturer states phones of 4 to 7 inches, which covers iPhones, large models included. It is not designed for a tablet.